IES-1000 User's Guide
This command clears the system error log.
If you clear a log (using the errlog clear command), you may not view it again.
5.8.3
Saving and Viewing a Previous Error Log
You may save and view a previous error log after warm restarting the IES-1000 (refer to Figure 5-1).
192.168.1.1> sys
192.168.1.1 sys> errlog display
0 Thu Jan 01 00:00:12 SNMPR
1 Thu Jan 01 00:00:14 CONSOL
192.168.1.1 sys> home
192.168.1.1> restart
192.168.1.1> fm
192.168.1.1 fm> cat errorlog
0 Thu Jan 01 00:00:12 SNMPR
1 Thu Jan 01 00:00:14 CONSOL
Figure 5-1 Example: Procedure to Save and View a Previous Error Log
5.8.4
Set Slot Command
Syntax:
192.168.1.1 sys> set slot <slot number>
where
<slot number>=
This command sets slot number of the network module. This is an optional parameter to help network
administrators keep track of individual network modules. Enter the command without the slot number to
display the network module's slot number.
5.8.5
Set Chassis Command
Syntax:
192.168.1.1 sys> set chassis <chassis number>
where
<chassis number>=
This command sets a number to identify this IES-1000 in a network. This is an optional parameter to help
network administrators keep track of multiple IES-1000s. Enter the command without the chassis number to
display the IES-1000's chassis number.
5-8
WARN
Cold Start Trap
INFO
CONSOLE Session Begin
WARN
Cold Start Trap
INFO
CONSOLE Session Begin
This network module's number in the IES-1000 chassis (1 or 2).
The number for this IES-1000 chassis (1 to 64).
Log in memory before you restart
your IES-1000.
Make sure you restart using these
CI commands. This procedure will
not work if you cold restart the IES-
1000. DO NOT turn the IES-1000
power switch off and on during this
procedure.
Log in file after you restart your IES-
1000.
System Commands