Figure 10-1 Example: Pvid Command Display - ZyXEL Communications ZyXEL DMA 1000 User Manual

This command sets the VLAN ID to a specific port in the PVID table. To display the PVID table simply enter
this command without parameters, as shown next.
192.168.1.1 vlan1q> pvid
Make sure you set all bonded ports to have the same PVID.
10.6.4 SVLAN CPU Command
Syntax:
192.168.1.1 vlan1q> svlan cpu [<vid>]
where
<vid> =
This command registers your CPU as a port member of the static VLAN with <vid>. To display the CPU
static VLAN identification, simply enter this command without parameters, as shown next.
192.168.1.1 vlan1q> svlan cpu
10.6.5 SVLAN List Command
Syntax:
192.168.1.1 vlan1q> svlan list
IEEE 802.1Q Tagged VLAN Commands
pvid
-----
1
1
1
1
1
1
1
1
1
192.168.1.1 vlan1q>

Figure 10-1 Example: PVID Command Display

A VLAN ID. Valid parameter range = [1 – 4094].
port#
-----
1
2
3
4
5
6
7
8
9
IES-1000 User's Guide
10-5