Download Print this page

ZyXEL Communications ZyXEL DMA 1000 User Manual: Bootp/tftp Firmware Recovery Of The Network Module

Zyxel communications hub/switch user's guide.
Hide thumbs

Advertisement

IES-1000 User's Guide
Do not turn off the network module during the updating process, as it may corrupt the firmware
1.
Connect to the network module with your favorite FTP client.
The command for the network module is generally: ftp < network module IP address> at the
computer command prompt.
2.
Enter the user name (just press [ENTER]). For example,
User: <ENTER>
3.
Enter the management password (1234 by default). For example,
Password: 1234
230 Logged in
4.
Transfer the firmware file to the network module. For example,
ftp> put 201AS0b1.img image
where
201AS0b1.img
image
5.
Quit FTP. For example,
ftp> quit
Wait for the update to finish. The network module will restart automatically.
Do not turn off the IES-1000 during the updating process, as it may corrupt the firmware and
15.2
BOOTP/TFTP Firmware Recovery of the Network
Module
The network modules use BOOTP/TFTP for firmware recovery through their built-in BOOTP/TFTP client when
the network modules are restarted. To recover the firmware, first download it from the ZyXEL web site and store
it on your computer. You can use any BOOTP/TFTP server (for example, BootpTftp.exe) to update the network
module's firmware. The update procedure for BootpTftp.exe is as follows:
Do not turn off the IES-1000 during the updating process, as it may corrupt the firmware and
1.
Connect your network module's LAN port to a computer's LAN port directly using a crossover
Ethernet cable, or connect both to an Ethernet hub/switch using straight-through cables.
2.
Connect your network module's console port to a computer's serial port with a console cable.
3.
Run any terminal emulation program, for example, Windows' built-in HyperTerminal, with the
following parameters:
VT100 terminal emulation
9600 bps
No parity, 8 data bits, 1 stop bit
No flow control
15-2
and make your network module unusable.
= The firmware file that you want to upload.
= The internal firmware name in the network module.
make your unit unusable.
make your unit unusable.
Firmware Upload and Recovery

Advertisement

Chapters

Troubleshooting

   Related Manuals for ZyXEL Communications ZyXEL DMA 1000

This manual also for:

Ies-1000

Comments to this Manuals

Symbols: 0
Latest comments: