Toro 41394 Operator's Manual page 86

Figure 126
1. Section-bypass valve
2. Quick-connect pins
2. Remove the quick connect pin that secures the
quick-connect coupler for the section supply
hose to the manifold for the quick-connect fitting
of the section-manifold valve
3. Remove the 2 flange clamps that secure the
section-manifold valve to the flanges of the
adjacent components
Figure 127
1. Flange (coupling adapter)
2. Flange (section-manifold
valve)
4. For left or right section-valve manifolds, remove
the 2 flange-head bolts (1/4 x 3/4 inch) and
2 flange locknuts (1/4 inch) that secure the
section-valve manifold to the valve support
(Figure 128).
g191303
3. Quick-connect coupler
(section supply hose)
4. Quick-connect fitting
(agitation valve manifold)
(Figure 126).
(Figure 127).
g191300
3. Section-manifold valve
4. Flange clamps
1. Flange locknut (1/4
inch—left and right
section-valve manifold
positions)
2. Section-bypass valve
3. Quick-connect fitting
(section-valve manifold)
5. Move the section-valve manifold and gaskets
down to clear the section-bypass valve and then
away from the machine
Note:
If needed, loosen the mounting hardware
for the left or right section-valve manifolds as
needed to provide clearance.
Note:
Retain the flange clamps, gaskets and
quick-connect pins for installation in
the Section-Manifold Valve (page
Cleaning the Manifold Valve
1. Position the valve stem so that it is in the closed
position (Figure
86
Figure 128
4. Flange (coupling adapter)
5. Gasket
6. Flange-head bolt (1/4 x
3/4 inch—left and right
section-valve manifold
positions)
(Figure 128).
Installing
88).
129B).
g191304