Table of Contents
Advertisement
Figure 137
1. Flange (pressure-filter
head)
2. Flange (coupling adapter)
3. Flange clamp
2.
Loosely secure the agitation-valve manifold to
the agitation-bypass valve, pressure filter head,
and coupling adapter
flange clamps that you removed in
the Agitation-Manifold Valve (page
3.
Assemble the agitation-valve manifold to the
valve support with the 2 flange-head bolts (1/4
x 3/4 inch) and 2 flange locknuts (1/4 inch) that
you removed in
Removing the Agitation-Manifold
Valve (page
85).
4.
Torque the flange-head bolts and flange locknuts
to 1978 to 2542 N∙cm (175 to 225 in-lb).
5.
Tighten the 3 flange clamps by hand
137).
6.
Assemble the quick-connect coupler of the
agitation hose onto the quick-connect fitting
of the agitation-valve manifold with the
quick-connect pin
7.
If you loosened the mounting hardware for the
pressure-filter head, tighten the nut and bolt to
1978 to 2542 N∙cm (175 to 225 in-lb).
4. Quick-connect pin
5. Quick-connect coupler
(agitation hose)
6. Quick-connect fitting
(agitation valve manifold)
(Figure
137) with the 3
Removing
85).
(Figure
(Figure
137).
Installing the Valve Actuator
1.
Align the actuator to the manifold valve
123).
2.
Secure the actuator and valve with the retainer
that you removed in step
Valve Actuator (page
g191301
90
(Figure
2
of
Removing the
84).
Advertisement
Table of Contents
