Toro 41394 Operator's Manual page 64

Figure 88
1. Fuel-tank neck
2. Arm (sending-unit float)
3. Pickup tube (fuel filter)
g032543
4. Fuel pump/sending unit
5. Filter
6. Float
Replacing the Fuel Filter
1. Remove the pickup tube of the fuel filter from
the fitting of the fuel pump
Note:
Discard the fuel filter.
1. Fitting (fuel pump)
2. Float arm (full position)
3. Pickup tube
2. Align the pickup tube of the new fuel filter with
the fitting of the fuel pump
3. Align the long leg of the fuel filter with float when
the float arm is in the empty position
4. Insert the fuel-pump fitting into the pickup tube
until the fitting is fully seated
64
(Figure 89).
Figure 89
4. Float arm (empty position)
5. Fuel filter (short leg)
6. Fuel filter (long leg)
(Figure 89).
(Figure
(Figure 89).
g028351
89).