Smartrax Tampering Warning Label - Raven SmarTrax Installation Manual

Chapter 3

SmarTrax Tampering Warning Label

Raven Industries supplies a tampering warning label (P/N 041-0159-689) with all SmarTrax kits. This label
should be applied on or near the SmarTrax hydraulic block or mounting bracket and in a location where anyone
working on the machine is able to clearly see and read the label.
Safety Warning Label Affixed Near SmarTrax Valve
FIGURE 2.
Tampering
Warning Label
Thoroughly clean and dry the surface to which the label will be affixed.
1.
Remove the protective backing from the tamper warning label (P/N 041-0159-689).
2.
Carefully apply the label to the cleaned area and rub with a dry cloth to ensure the label is firmly applied.
3.
10 RoGator 854 ('98 & Newer) SmarTrax™ Installation Manual