Chapter 4 - Library Specifications; Size And Weight - Spectra Logic T-Series Spectra T200 Supplementary Manual

This chapter provides the specifications for the library that you will need
when preparing for installation. See the Appendix titled "Specifications" in
the Spectra T200, T380, and T680 User Guide for additional specifications.
The user guide is available at www.spectralogic.com/documents.
S W
IZE AND EIGHT
The following table shows the size and weight specifications for the library.
Parameter
Height
Width
Chassis
Front panel
Depth
(with drive cover)
Weight
b
(base chassis)
c
Drives
LTO drive
SAIT drive
SDLT drive
RXT drive
a. The T680 is shipped and installed in a rack; the sizes shown are for the library rack.
b. The base chassis contains no drives, media, QIPs or power supplies. To calculate the approximate weight of a loaded library, add the
weight for each drive installed, 5 lb. (1.8 kg) for each TeraPack magazine full of media, 6 lb. (2.7 kg) for each RXT media pack
installed, 5 lb. (1.8 kg) for each QIP installed, and 4 lb. (1.5 kg) for each power supply installed.
c. Weights are approximate.
Library Specifications
Note: The specifications in this chapter are subject to change without
notice.
T200
35 in. (89 cm)
17.5 in. (44.4 cm)
19.0 in. (48.3 cm)
41 in. (104 cm)
230 lb. (104 kg)
Chapter 4
Specification
T380
49 in. (125 cm)
17.5 in. (44.4 cm)
19.0 in. (48.3 cm)
41 in. (104 cm)
305 lb. (138 kg)
11 lb. (5 kg)
13 lb. (6 kg)
13 lb. (6 kg)
9 lb. (4 kg)
37
a
T680
80.5 in. (204,5 cm)
24 in. (61 cm)
48 in. (122 cm)
765 lb. (347 kg)