6.1.3 Fcc; Fda/Cdrh; Ised - Siemens SIMATIC NET RUGGEDCOM RST916P Equipment Manual

Certification
6.1.3 FCC
•
The device is marked with a CE symbol and can be used throughout the European
community.
6.1.3 FCC
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
6.1.4

FDA/CDRH

This device meets the requirements of the following U.S. Food and Drug
Administration (FDA) standard:
•
6.1.5

ISED

This device is declared by Siemens Canada Ltd. to meet the requirements of the
following ISED (Innovation Science and Economic Development Canada) standard:
•
36
CISPR 32/EN 55032
Electromagnetic compatibility of multimedia equipment – Emission requirements
Title 21 Code of Federal Regulations (CFR) – Chapter I – Sub-chapter J –
Radiological Health
CAN ICES-3 (A)/NMB-3 (A)
RUGGEDCOM RST916P
Equipment Manual, 11/2023, C79000-G8976-1489-06