Equipment Set-Up; Accessories; Usage Of External Usb Devices - Strong SRT 8541FTA User Manual

Digital terrestrial receiver
Table of Contents

Advertisement

packaging with its accessories. Failing to comply with such packaging procedures could damage the
product and void your warranty.

1.3 Equipment Set-up

We recommend you to consult a professional installer to set up your equipment. Otherwise, please
follow the instructions below:
Refer to the user manual of your TV and, if applicable, your antenna.
Make sure that the HDMI cable and, if applicable, outdoor components are in a good condition.
If you use the TV SCART connection, use a well shielded SCART cable.
This manual provides complete instructions for installing and using this receiver. The following
symbols will serve as follow.
WARNING:
NOTE:
MENU
Move to

1.4 Accessories

Installation instructions
1 remote control unit
2x batteries (AAA type)
WARNING:

1.5 Usage of external USB devices

It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible
to USB 2.0 specifications, recording, playback and other multimedia functions of the receiver
might not work properly.
STRONG cannot guarantee the playback of files although extensions are listed, as it depends on
codec, data bit rate and resolution used (all MPEG codec formats are supported).
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver.
STRONG will not take responsibility for any loss of information or circumstances caused by loss
of information.
4
Indicates warning information.
Indicates any other additional important or helpful information.
Represents a button on the remote control or the receiver.
(Bold characters)
Represents a menu item within a window.
(Italic characters)
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used (e.g. NiMH), we
recommend using types with low self-discharge to ensure long time
operation of your remote control.

Advertisement

Table of Contents
loading

Table of Contents