Equipment Set-Up; Accessories; Usage Of External Usb Devices - Strong SRT 7010 User Manual

Digital hd satellite receiver
Table of Contents

Advertisement

packaging with its accessories. Failing to comply with such packaging procedures could damage the
product and void your warranty.

1.3 Equipment Set-up

We recommend you consult a professional installer to set up your equipment. Otherwise, please
follow the instructions below:
Refer to the user manual of your TV and your antenna.
Make sure that the SCART/HDMI cable and outdoor components are in a good
condition and the SCART/HDMI connections are well shielded and from good quality.
This manual provides complete instructions for installing and using this receiver. The symbols serve
as follows.
WARNING
NOTE
MENU
Move to

1.4 Accessories

1x installation instructions
1x remote control
2x batteries (AAA type)
NOTE:

1.5 Usage of external USB devices

It is recommended to use USB 2.0 storage devices. If your device is not compatible to
USB 2.0 specifications, multimedia, recording and Timeshift functions of the receiver
might not work properly.*
If you are going to use an external USB HDD (Hard Disk Drive), please consider that the
power specifications may exceed the supported output of your receiver (5 V/800 mA).
If so, please connect your USB HDD to an according external power adapter.
STRONG cannot guarantee compatibility with all types of USB storage devices.
It is advised not to store important information on USB storage devices used with
the receiver. Always make backups of data on your USB storage device before using
it with this receiver. STRONG will not take responsibility for any loss of information or
circumstances caused by loss of information.
STRONG cannot guarantee the playback of all files although extensions are listed, as it
depends on file size, codec, bit rate and resolution.
Please ensure that either the USB device is already formatted to FAT/FAT32, or format
the USB device via your receiver, refer to chapter 7.7 USB for details.
4
Indicates warning information.
Indicates any other additional important or helpful information.
Represents a button on the remote control or the receiver. (Bold characters)
Represents a menu item within a window. (Italic characters)
The batteries should not be recharged, disassembled, electrically short-
circuited or be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used, we recommend
using (e.g. NiMH) types with low self-discharge to ensure long time
operation of remote control.

Advertisement

Table of Contents
loading

Table of Contents