Radio / Radio Navigation System: Enter Anti-Theft Coding Pin - Volkswagen Amarok 2011 Service & Maintenance

Note
Radio codes cannot be read in "FISH" with the previous ac‐
♦
cess authorization for radio codes. Reading only functions with
the access authorization for "GeKo" (secrecy and component
protection).
The access authorization for "GeKo" (secrecy and component
♦
protection) for reading the radio code using vehicle diagnostic,
testing and information system -VAS 5051B- or vehicle diag‐
nostic and service information system -VAS 5052 A- is also
valid for reading the radio code in Vehicle Individual Service
Notes "FISH".
Authorization prerequisites for reading radio code
• Available access for the user of the system "GeKo" (secrecy
and component protection)
Perform the following jobs:
– Follow the instructions of Vehicle Individual Service Notes
"FISH" in Electronic Service Information System "ElsaWin".
Note
To read the radio code the radio serial number must be en‐
♦
tered fully. This can be entered using vehicle diagnostic, test‐
ing and information system -VAS 5051B- or vehicle diagnostic
and service information system -VAS 5052 A- via "Guided
functions" and "Measured value block 81". For this follow in‐
structions of vehicle diagnostic, testing and information sys‐
tem -VAS 5051B- or vehicle diagnostic and service informa‐
tion system -VAS 5052 A- .
To enter the radio serial number the 17-digit chassis number
♦
is taken from the order.
If you are authorized to read the radio code via "GeKo" (se‐
♦
crecy and component protection), you will obtain the 4-digit
radio code to the radio serial number.
Note
Inform the customer about the radio code.
5.38 Radio / radio navigation system: Enter
anti-theft coding PIN
The anti-theft coding electronically prevents unauthorized per‐
sons from operating the unit after it has been removed from
vehicle. The anti-theft codes are also called radio codes or se‐
curity codes. Security code means that each unit with an anti-theft
coding is programmed with its own code number. This security
code is not active when leaving the factory. The security code is
found on the unit card, if fitted. If the unit card is not fitted, the
security code can be read from a central database using vehicle
diagnosis tester.
Amarok 2011 ➤
Maintenance - Edition 10.2012
5. Descriptions of work
133