Bolin Technology UCC-2HD10BT-U32 User Manual page 16

PELCO P/D Keyboard RS485 Connection
1. Use PELCO P/D compatible keyboard.
2.
Use preset 95# on the keyboard to bring up/exit camera OSD menu.
Use joystick and Button "OPEN" or "CLOSE" to navigate OSD menu.
3.
4.
To operate keyboard, please refer to the user manual of the keyboard you are using.
Note
For RS-232 VISCA control, this unit does not support daisy chain connection for using multiple cameras.
For control details, refer to Operating Instructions of control keyboard/station software.

You need to match the communication speed between the camera and the joystick controller.

You can use the RS-232 connections when using the RS422/485 connection.

The specified frame rate may change when communicating via a USB3.0 hub
.
Operating Multiple Cameras Using RS-422/485

Using RS-422 (VISCA), you can connect up to 7 cameras.

Using RS-485 (PELCO), you can connect up to 255 cameras.

Using RS-485 (PELCO), all camera addresses must be set up before the connection. You can set the camera
address by operating OSD menu.

In this case, you can use multiple control keyboards. Only one keyboard that the camera can response to at one
time.

The joystick of the remote keyboard controller allows comfortable pan/tilt and zoom operations.
System Configuration (Operating Multiple Cameras)
Notes

You can use the RS-232 connections when using the RS-422/485 connection.

Only one camera at a time can be displayed on the computer.

The specified frame rate may change when communicating via a USB3.0 hub
16