Picture Menu; Pan Tilt Zoom Menu - Bolin Technology UCC-2HD10BT-U32 User Manual

PICTURE Menu

The PICTURE menu is used to set the items related to the picture.
SHARPNESS:
Picture sharpness value ranges from 0 to 20. You can enjoy emphasized edge and
high-resolution images.
EFFECT: (Picture Effect)
It consists of the following functions:
Image effect from Off, B&W, NEG.ART
NOISE REDUCTION:
Noise reduction - you can enjoy clearer images by removing unnecessary noise. You can select 4 levels from OFF (MIN),
1 to 3 (MAX).
FLIP:
Image E-Flipper – Used when ceiling mounting or upright mounting. Set to OFF is upright mode, set to ON is for ceiling
mount.
MIRROR: You can use it to horizontally flip video.
DE-FLICKER:
You can turn it ON if the Video output format frame rate is difference from your country's electricity Frequency.
GAMMA:
In this mode, the gamma can be set to value from 0 to 4.
WDR: (Wide dynamic range mode): WDR feature is available on certain product models.
Wide Dynamic: ON, OFF. The camera distinguishes light and dark areas within the same scene, adjusts the
brightness for dark areas, and also controls the blown out highlights.
You can select the wide dynamic range mode between ON and OFF
SATURATION:
You can adjust saturation parameter from 0~15.
CONTRAST:
Increase and decrease contrast to adjust separation between dark and bright.

PAN TILT ZOOM Menu

The PAN TILT ZOOM menu is used to select the pan/tilt/ zoom mode.
DIGITAL ZOOM:
Set to DIGITAL ZOOM ON, 12X digital zoom is activated.
You can set digital zoom to ON or OFF. When set to OFF, digital zoom does not operate,
and only optical zoom is available. When set to ON, digital zoom takes over after
optical zoom reaches MAX (10× ). Up to 120× can be zoomed digitally.
When digital zoom is available, the resolution decreases
ZOOM SPEED:
Set Zoom Speed value to from 1 to 8 (The speed from low to high), to adjust the speed of SLOW ZOOM on remote
controller.
ZOOM RATIO OSD (Zoom times display):
Set Ratio OSD to ON, the number of the zoom times that you are operating displays on screen.
ADAPTIVE PT:
Set to ON, Pan Tilt speed would be adaptive with the zoom range.
PRESET SPEED:
Set Preset Speed value to from 0 to 5 (Speed up to 5), to adjust the speed of PRESET on remote controller.
PAN DIR:
Camera horizontal Left and right orientation setting, option: Normal/Invert
TILT DIR:
Camera tilt up and down orientation setting, option: Normal/Invert
22