System Configuration; Connection; Obtain Video Signal - Bolin Technology VCC-8-4K20S-3SM User Manual

System Configuration

Connection

In this connection configuration, HDMI cable, SDI video cable, data cable is required. To obtain these third party components
or accessories,

Obtain Video Signal

HDMI 4K / HD Video signal
1. The camera video format is set to 1080I59.94 by default, so that you can have the video display on regular HD
monitor/TV. Do not set camera video format to 4K resolution until you have a 4K monitor/TV ready for
displaying.
2. Change the camera video format setting to 4K if a 4K displayer is ready.
3. Connect the camera to a 4K or HD monitor/TV using HDMI cable. For displaying 4K video, a HDMI version
1.4 needs to be used.
4. Turn on the camera, video will display on the monitor after running initializing.
5. Information of the camera initial setting status will display for 5 seconds.
6. You can set the video format of the camera to the one you want to display. (How to set video format, see page
20)
SDI Video Signal
The camera can simultaneously stream SDI video output with HDMI video output.
1. Connect SDI cable in between the camera your SDI Device/display.
2. You now have SDI video output.
3. SDI video only supports 1080P, does not support 4K format.
Camera Initial setting status Information
Information of the camera initial setting status will display for 5 seconds.
10