Operating Multiple Cameras With The Infrared Remote Controller; Adjusting The Camera - Bolin Technology UCC-2HD10BT-U32 User Manual

Zooming
Button [T] - Zoom-IN and [W] - Zoom-OUT.
Button [F] – FAST mode.
Press once and the LED turns red to activate the Fast Zoom Speed Mode, press again to go back to normal Zoom
Speed mode.
Note
When you perform pan/tilt operation while the camera is in the telephoto mode,
the moving speed of the image on the screen may be a little jerky.

Operating Multiple Cameras with the Infrared Remote Controller

1. Set the DIP Switch on the bottom of the camera to the number of camera you want to operate to 1, 2 or 3.
(See bottom DIP Switch setting instruction)
2. Press the CAMERA SELECT button on the infrared remote controller
that corresponds to the number set in step 1.
Then, you can operate the camera(s) specified by number. Every time you
operate the camera(s) using the infrared remote controller, the CAMERA SELECT button pressed in step 2 lights.

Adjusting the Camera

Focusing on a Subject
Focusing the camera on a subject automatically
Press the AUTO button.
The camera focuses on the subject at the center of the screen automatically.
Focusing the camera on a subject manually
After pressing the MANUAL button, press either the FAR or the NEAR button
to have the camera focus on the subject.
Shooting with Back Lighting
When you shoot a subject with a light source behind it, the subject becomes dark.
In such a case, press the BACK-LIGHT button.
To cancel the function, press the BACK-LIGHT button again.
Note
The BACK-LIGHT function is effective if MODE is set to FULL AUTO in the
EXPOSURE menu of the camera.
25