Setting And Displaying The Ramp Function - Binder 9010-0323 Operating Manual

9.2

Setting and displaying the ramp function

3x
without fan
4x
with fan
Temperature course with ramp function
Normal display
BD / BF / ED / FD / FED (E3.1) 03/2019
From Normal display
with the arrow-up button to the Ramp function menu.
Ramp function (not programmed)
Press OK to enter the gradient in degree per minute.
The gradient flashes.
Enter the gradient (0 up to 9)
confirm with OK and go on toenter the target ramp set-point
The target ramp set-point value flashes.
Enter the target ramp set-point
and confirm with OK.
Selected ramp with gradient 1 and target ramp set-point 40 °C (example)
Back to Normal display.
Normal display showing the actual temperature, the gradient and the target
ramp set-point (example: 40 °C)
after 1
minute
Normal display
after 2
minutes
Normal display
Etc.
page 49/106