Selecting The Temperature Unit - Binder 9010-0323 Operating Manual

6.5

Selecting the temperature unit

You can chose between degrees Celsius °C and degrees Fahrenheit °F.
If the unit is changed, the temperature set-point and limits are converted accordingly.
Also when specifying the ramp function (see chap. 9) this setting is accordingly taken as the basis.
C = degrees Celsius
F= degrees Fahrenheit
5x
without fan
6x
with fan
2x
BD / BF / ED / FD / FED (E3.1) 03/2019
0 °C =
100 °C = 212°F
From Normal display
with the arrow-up button to the user menu
Confirm with OK.
Enter the password (factory setting: 00 00)
and confirm each entry with OK.
With the arrow-up button to the temperature unit selection menu.
The current temperature unit is shown.
Press OK to select the temperature unit.
The setting flashes.
Select the setting with arrow buttons
and confirm with OK.
Back to Normal display.
31°F Conversion:
[Value in °F] = [Value in °C] ∗ 1.8 + 32
page 26/106