Set-Point Entry For Temperature And Fan Speed - Binder 9010-0323 Operating Manual

6.6

Set-point entry for temperature and fan speed

or
Check and/or adjust the safety controller following any changes of the set-point (chap. 7).
BD / BF / ED / FD / FED (E3.1) 03/2019
From Normal display
with the arrow-up button to the Set-point entry menu.
The current temperature set-point is displayed.
Press OK to enter the temperature set-point.
The temperature set-point flashes.
Enter the temperature set-point with arrow buttons with an accuracy of a tenth
of a degree (BD, BF) or of one degree (ED, FD, FED)
and confirm with OK.
Back to Normal display.
with chambers with adjustable fan speed (BF, FED):
go on to enter the fan speed.
The fan speed set-point is displayed.
Press OK to enter the fan speed
The fan speed set-point flashes
Adjust the fan speed in steps of 10 % with arrow buttons
and confirm with OK.
Back to Normal display.
page 27/106