Overview And General Settings On The R4 Controller; Controller Overview; Normal Display - Binder 9010-0323 Operating Manual

6.

Overview and general settings on the R4 controller

6.1

Controller overview

Buttons on the controller
The arrow buttons serve to navigate and to enter the values
The OK button serves to select the parameters and to confirm the entered values
The Back button serves to reach the preceding level
If the Standby button is pressed down for approx. 3 seconds, the display changes to
standby mode. To activate the display, press down the standby button again for approx.
3 seconds
Display in standby mode with standby symbol
Status symbols on the controller display
Heating
active
6.2

Normal display

BD / BF / ED / FD / FED (E3.1) 03/2019
Timer
operation
Normal display with chambers without fan (BD, ED)
or with fixed fan speed (FD)
Normal display with chambers with adjustable fan speed (BF, FED)
Overtemperature
alarm of the safety
controller
Standby
mode
page 22/106