Binder 9010-0323 Operating Manual page 46

2x
Normal display during timer operation with timer function "Delayed On"
Normal display after the timer has expired:
BD / BF / ED / FD / FED (E3.1) 03/2019
The minute value flashes.
Enter the minutes of the timer run-time (0 up to 59)
confirm with OK
and go on to enter the temperature set-point
The temperature set-point flashes.
Enter the temperature set-point,
confirm with OK and go on to enter the fan speed set-point valid for the time
after the timer has expired
The current fan speed set-point is shown
Enter the fan speed in steps of 10 % -
0 % and 40 % up to 100 %
and confirm with OK.
The timer function "Delayed On" is activated
Back to Normal display.
The Timer run-time until turning on the heating is running.
Timer function "Delayed On".
The heating is off, temperature approximates ambient temperature.
The timer has expired. The time function is off.
The heating is active to equilibrate the temperature set-point.
The fan operates with the selected fan speed.
page 46/106