Start Up; Behavior When Opening The Door; Loading - Binder 9010-0323 Operating Manual

5.

Start up

Insert the plug into a suitable socket (chap. 4.2).
BF, FD, FED size 720: Turn the chamber at the main power switch (chap. 2.3).
If there is no other indication on the controller than the standby symbol, press the standby button
until the display lights up.
The controller now shows normal display (chap. 6.2). If a timer function was active prior to turning off the
chamber, it is shown in the controller display.
Warming chambers may release odors in the first few days after commissioning. This is not a
quality defect. To reduce odors quickly we recommend heating up the chamber to its nominal
temperature for one day and in a well-ventilated location.
5.1

Behavior when opening the door

BD, ED: Depending on the temperature, heating performance may be adapted when opening the door.
BF, FD, FED: When opening the door, heating and fan turn off as long as the door remains open.
5.2

Loading

When loading the chamber, observe the maximum permissible load per rack and the maximum permissi-
ble total load (see tecnical data, chap. 16.4 to 16.8).
Observe the correct orientation of the racks (chap. 4.4).
Overload of the racks.
Risk of injury.
∅ Do not exceed the maximum permissible load per rack.
∅ Do not exceed the maximum permissible total load.
 Use only racks intended for this chamber model.
 Observe the correct orientation of the racks when inserting them.
 Gently place the load on the racks.
BD / BF / ED / FD / FED (E3.1) 03/2019
WARNING
page 21/106