Inserting The Racks - Binder 9010-0323 Operating Manual

4.4

Inserting the racks

Observe the correct orientation of the racks:
Standard rack: The lateral brackets must be above the rack surface when inserting the rack.
Optional heavy load rack: The lateral brackets must be below the rack surface when inserting the rack.
Standard rack
Overload of the racks.
Risk of injury.
∅ Do not exceed the maximum permissible load per rack.
∅ Do not exceed the maximum permissible total load.
 Use only racks intended for this chamber model.
 Observe the correct orientation of the racks when inserting them.
 Gently place the load on the racks.
BD / BF / ED / FD / FED (E3.1) 03/2019
Figure 9: Correct orientation when inserting the racks
Optional heavy load rack
WARNING
page 20/106