General Safety Instructions On Installing And Operating The Chambers - Binder 9010-0323 Operating Manual

Symbol on the type plate
(UL chambers only)
1.5

General safety instructions on installing and operating the chambers

With regard to operating the chambers and to the installation location, please observe the DGUV guide-
lines 213-850 on safe working in laboratories (formerly BGI/GUV-I 850-0, BGR/GUV-R 120 or ZH 1/119,
issued by the employers' liability insurance association) (for Germany).
BINDER GmbH is only responsible for the safety features of the chamber provided skilled electricians or
qualified personnel authorized by BINDER perform all maintenance and repair, and if components relat-
ing to chamber safety are replaced in the event of failure with original spare parts.
To operate the chamber, use only original BINDER accessories or accessories from third-party suppliers
authorized by BINDER. The user is responsible for any risk caused by using unauthorized accessories.
Danger of overheating.
Damage to the chamber.
∅ Do NOT install the chamber in unventilated recesses.
 Ensure sufficient ventilation for dispersal of the heat.
Do not operate the chambers in hazardous locations.
Explosion hazard.
Danger of death.
∅ Do NOT operate the chamber in potentially explosive areas.
 KEEP explosive dust or air-solvent mixtures AWAY from the chamber.
BD / BF / ED / FD / FED (E3.1) 03/2019
Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on
the market in the EU after 13 August 2005 and to be disposed of
in a separate collection according to Directive 2012/19/EU on
waste electrical and electronic equipment (WEEE).
The chamber is certified according to Customs Union Technical
Regulation (CU TR) for the Eurasian Economic Union (Russia,
Belarus, Armenia, Kazakhstan Kyrgyzstan).
GS mark of conformity of the "VDE Prüf- und Zertifizierungsinsti-
tut" (Testing and Certification Institute of the Association for
Electrical, Electronic and Information Technologies
The chamber is certified by Underwriters Laboratories Inc.
cording to the following standards:
rd
• UL 61010-1, 3 Edition, 2012-05, rev. 2015-07
• CAN/CSA-C22.2 No. 61010-1, 3
2015-07
CAUTION
DANGER
®
ac-
rd
Edition, 2012-05, rev.
page 9/106