Forwarding Callers To A Text Message - iPECS 1000i Series User Manual

1000i Series IP Phone (LME)
User Guide

3.7.2 Forwarding callers to a Text Message

Using an iPECS Phone, you can send a 'Text Message' to internal callers. When calling your Station, internal
callers will automatically receive the selected message or you can select a message in response to an internal
call, Silent Text Message.
There is 1 Custom Display Message up to 24 characters. In addition, there are ten fix Pre-Defined Text
Messages; some allow auxiliary input for time, date, etc. as shown in list below.

Message 1: LUNCH RETURN AT hh:mm

Message 2: ON VACATION - RETURN AT DATE mm/dd

Message 3: OUT OF OFFICE - RETURN AT TIME hh:mm

Message 4: OUT OF OFFICE- RETURN AT DATE mm/dd

Message 5: OUT OF OFFICE - RETURN UNKNOWN

Message 6: CALL (enter up to 17 digits)

Message 7: IN OFFICE STA xxxx

Message 8: IN MEETING - RETURN AT TIME hh:mm

Message 9: AT HOME

Message 0: AT BRANCH OFFICE

*: User Custom Message

#: Deactivate to activate Text Message Forward
To activate Text Message Forward:
Press the MENU button.
1)
Dial the User Program feature code 41.
2)
Dial the one-digit text Message code (0-9).
3)
Dial any auxiliary input for messages 1-4 and 6-8.
4)
Press the OK Softkey or the HOLD (SAVE) button, you will receive confirmation tone.
5)
To cancel Text Message Forward:
Press the MENU button.
1)
Dial the User Program feature code 41.
2)
Press the # dial pad button.
3)
Press the OK Softkey or the HOLD (SAVE) button, you will receive confirmation tone.
4)
To program your Station Custom Message at your station:
Press the MENU button.
1)
Dial User Program feature code 42.
2)
Enter the message contents; up to 24 characters can be entered. Refer to '1.10 Phone Entering
3)
Text' for text entry details.
Press the OK Softkey or the HOLD (SAVE) button to save the message.
4)
25
Issue 1.2