Forwarding Calls; Forwarding Calls To Another Station Or Voice Mail Or External Number - iPECS 1000i Series User Manual

1000i Series IP Phone (LME)
User Guide

Forwarding Calls

3.7

3.7.1 Forwarding calls to another Station or Voice Mail or external number

Incoming calls may be diverted to other resources of the system. Resources include other stations, the VPCM
Voice Mail and External Voice Mail. Your LCD and the LCD of the phone receiving the call indicate the forward
status. Call Forward can be activated from your phone or from a different station (Call Forward, Remote). You
may define the conditions or 'type of forward' as below:

Remote – permits you to activate call forward from another station in the system. In this case, your
station authorization code must be entered.

Unconditional - all calls to the station, except recalls, will forward.

Busy - Immediately forwards calls, except recalls, when the station is busy.

No Answer - forwards calls to the station, except recalls, when the station is idle and does not answer
within the No Answer timer.

Busy/No Answer - forwards calls to the station if not answered within the No Answer timer.
To activate Call Forward from your phone:
Lift the handset.
1)
Press the FORWARD Softkey or the DND button.
2)
Dial the type of forward code 1-4.
3)
Dial the destination number.
4)
Press the HOLD(SAVE) button or the SAVE Soft key.
5)
To deactivate Call Forward from your phone:
Lift the handset.
1)
Press the FORWARD Softkey or the DND button.
2)
Press the # button on the dial pad.
3)
To activate Call Forward from a different phone within the System (Call Forward, Remote):
Lift the handset.
1)
Press the FORWARD Softkey or the DND button.
2)
Dial 0, the Remote Call Forward code.
3)
Dial your Authorization code (Station number & Password).
4)
Dial the 'type of forward' code 1-4.
5)
Dial the destination number.
6)
To deactivate Call Forward, Remote:
Lift the handset.
1)
Press the FORWARD Softkey or the DND button.
2)
Dial 0, the Remote Call Forward code.
3)
Dial your Authorization code (Station number & Password).
4)
Press the # button.
5)
24
Issue 1.2