Using Automatic Called Number Redial (Acnr) - iPECS 1000i Series User Manual

1000i Series IP Phone (LME)
User Guide
Dial the desired directory.
2)

1: Station Speed

2: System Speed

3: Station NAME
The LCD will display the names in alphabetical order.
3)
Scroll using the Navigation up/down keys or enter search characters. refer to the "table 4.3.4:
4)
Searching Text" to enter text from the dial pad.
Press the HOLD(SAVE) button to place the call.
5)
To enter your station user name:
Press the MENU button.
1)
Dial 12 the Station NAME registration code.
2)
Enter the NAME, up to 16 characters. Refer to the "1.10 Phone Entering Text" to enter text.
3)

4.3.7 Using Automatic Called Number Redial (ACNR)

When making an external call and a busy signal is received, Automatic Called Number Redial (ACNR) will
retry the number until the call is connected, the feature is cancelled, or the maximum number of retries is
attempted.
For each retry, the system will activate your Speaker then place the call with the microphone muted. When
the remote end answers, you must select the MUTE button, or lift the handset.
Either of these actions cancels the ACNR request as well as connects you to the remote party.
To set up ACNR, while on an outgoing call:
Use the Navigation button to display the next Softkey menu and select the ACNR Softkey.
1)
Hang-up the handset.
2)
To cancel the ACNR request:
✓ Press the ACNR STOP Softkey.
31
Issue 1.2