ifs NS4702-24P-4X-V2 User Manual page 62

Chapter 4: Web configuration
• Click >> to update the system log entries, starting from the last entry currently
displayed.
• Click >>I to update the system log entries, ending at the last available entry ID.
• Click Print to print the system log entry to the current entry ID.
Remote syslog
The System Log Configuration page displays the managed switch remote system log
information details.
The page includes the following fields:
Object
Mode
Syslog Server IP
Syslog Level
Buttons
• Click Apply to apply changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
SMTP configuration
The SMTP Configuration page displays the managed switch SMTP configuration
details.
58
Description
Indicates the server mode operation. When the mode operation is
enabled, the syslog message is sent to the syslog server. The syslog
protocol is based on UDP communication and received on UDP port
514. The syslog server will not send acknowledgments back to
sender since UDP is a connectionless protocol and it does not
provide acknowledgments. The syslog packet is always sent out even
if the syslog server does not exist. Selections include:
Enabled: Enable remote syslog mode operation.
Disabled: Disable remote syslog mode operation.
Indicates the IPv4 host address of syslog server. If the switch
provides the DNS feature, it also can be a host name.
Indicates what kind of message is sent to the syslog server.
Selections include:
Info: Send information, warnings, and errors.
Warning: Send warnings and errors.
Error: Send errors.
NS4702-24P-4X-V2 Managed Switch User Manual