Advertisement
Quick Links
NS3562-8P-2S-V2 Quick Installation
Guide
Figure 1: NS3562-8P-2S-V2 Industrial Managed Switch
Package contents
Thank you for purchasing the IFS NS3562-8P-2S-V2
industrial managed switch. The description of this model
is as follows: Industrial 8-Port 10/100/1000T 802.3at
PoE + 2-Port 100/1000X SFP Managed Gigabit Switch.
Unless specified, the term "industrial managed switch"
mentioned in this quick installation guide refers to the
NS3562-8P-2S-V2.
Open the box of the industrial managed switch and
carefully unpack it. The box should contain the following
items:
The industrial managed switch × 1
Quick installation guide × 1
DIN-rail kit × 1
Magnet kit × 1
Wall mounting kit × 1
RJ45 dust cap × 8
SFP dust cap × 2
P/N 1073703-EN • REV B • ISS 13JUL22
If any item is found missing or damaged, please contact
your local reseller for replacement.
Requirements
Workstations running Windows
Vista / 2003 / XP, MAC OS X or later, Linux, UNIX,
or other platforms are compatible with TCP/IP
protocols
Workstations are installed with Ethernet NIC
(Network Interface Card)
Ethernet Port Connection
Network cables - Use standard network (UTP)
cables with RJ45 connectors.
The above workstation has a Web browser and
JAVA runtime environment plug-in installed.
Note: We recommend using Internet Explorer 11.0 or
later to access the industrial managed switch. If the Web
interface of the industrial managed switch is not
accessible, turn off the anti-virus software or firewall and
then try it again.
Wiring the power inputs
The industrial managed switch features a strong dual
power input system (terminal block and DC jack) to
enhance system reliability and uptime.
Range model
3-pin terminal block
NS3562-8P-2S-V2
48~56 VDC
10 / 7 / 8 / 2008 /
®
Power Input
DC jack
48~56 VDC
1
Advertisement
Related Manuals for ifs NS3562-8P-2S-V2
Summary of Contents for ifs NS3562-8P-2S-V2
- Page 1 If the Web interface of the industrial managed switch is not Thank you for purchasing the IFS NS3562-8P-2S-V2 accessible, turn off the anti-virus software or firewall and industrial managed switch. The description of this model then try it again.
- Page 2 AC power cord is plugged in. This is not managed switch, follow the steps below: a hot-swappable switch. Hot-swapping this device will 1. Screw the DIN-rail on the industrial managed switch. result in damage. NS3562-8P-2S-V2 Quick Installation Guide...
-
Page 3: Starting Web Management
4. Type a new user name and password in the Edit computer should be set to 192.168.0.x (where x is a User page, following the guidelines as shown. Click number between 1 and 254, except 100) and the default Apply. subnet mask is 255.255.255.0. NS3562-8P-2S-V2 Quick Installation Guide... -
Page 4: Reset To Default Configuration
192.168.0.xx. Refer to the User Manual for further information about using the web management interface. Figure 8: NS3562-8P-2S-V2 Reset Button Note: For security purposes, change and memorize the new password after this first setup. Saving configuration via the Web In the industrial managed switch, the running configuration file is stored in the RAM. -
Page 5: Legal And Regulatory Information
Carrier, except where specifically permitted under US and international copyright law. Trademarks and IFS names and logos are a product brand of patents Aritech, a part of Carrier. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.