Advertisement
Quick Links
ES2402-V3 Series Quick Installation Guide
Figure 1: ES2402-24P-2C-V3 managed switch
Figure 2: ES2402-16P-2C-V3 managed switch
Figure 3: ES2402-8P-2C-V3 managed switch
Package contents
Thank you for purchasing an IFS ES242-V3 series 8/16/24-
Port 10/100TX 802.3at PoE +2-Port Gigabit TP/SFP combo
managed Ethernet switch. Model numbers of these switches
are as follows: ES2402-24P-2C-V3, ES2402-16P-2C-V3, and
ES2402-8P-2C-V3.
Unless specified, the term "managed switch" mentioned in this
quick installation guide refers to the IFS ES2402-V3 series.
Open the box of the managed switch and carefully unpack it.
The box should contain the following items:
The managed switch × 1
Quick installation guide × 1
Rubber feet × 4
Two rack-mounting brackets with attachment screws × 1
Power cord × 1
SFP dust-proof cap × 2
If any of these are missing or damaged, contact your dealer
immediately. If possible, retain the carton including the original
P/N 1073661-EN • REV D • ISS 03JUL22
packing materials for repacking the product in case there is a
need to return it to us for repair.
Requirements
The managed switch
provides a
management purposes. The following equipment is necessary
for further management:
Workstations running Windows
2003 / XP, MAC OS X or later, Linux, UNIX, or other
platforms are compatible with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network
Interface Card)
Ethernet port connection
Network cables – Use standard network (UTP) cables
with RJ45 connectors.
The above workstations have a web browser and
JAVA runtime environment plug-in installed.
Note: We recommend using Internet Explorer 11.0 or later to
access the managed switch. If the web interface of the
managed switch is not accessible, turn off the anti-virus
software or firewall and then try it again.
Starting web management
This section describes how to start up the web management
function for the managed switch. Note that the managed switch
is configured through an Ethernet connection. Ensure that the
manager computer is set to the same IP subnet address.
For example, if the default IP address of the managed switch is
192.168.0.100, then the manager computer should be set to
192.168.0.x (where x is a number between 1 and 254, except
100), and the default subnet mask is 255.255.255.0.
Figure 4: IP management diagram
The switch interface can be accessed by the following
browsers: Internet Explorer (version 11.0 or later), Google
remote login interface for
®
10 / 8 / 7 / 2008 / Vista /
1 / 4
Advertisement
Related Manuals for ifs ES2402-V3 Series
Summary of Contents for ifs ES2402-V3 Series
- Page 1 100), and the default subnet mask is 255.255.255.0. Unless specified, the term “managed switch” mentioned in this quick installation guide refers to the IFS ES2402-V3 series. Figure 4: IP management diagram Open the box of the managed switch and carefully unpack it.
- Page 2 Chrome (version 45 or later), Mozilla Firefox (version 52 or Figure 6: Main web interface screen later), and Apple Safari (version 10 or later). Logging in to the managed switch Use the Internet Explorer 11.0 or later web browser and type the IP address http://192.168.0.100 (the factory- default IP address) to access the web interface.
- Page 3 Figure 8: ES2402-16P-2C-V3 reset button Trademarks and patents IFS names and logos are a product brand of Aritech, a part of Carrier. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.
- Page 4 EU directives This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.