ifs NS4702-24P-4X-V2 User Manual page 105

Object
User Name
Security Level
Authentication Protocol
Authentication Password
Privacy Protocol
Privacy Password
Buttons
• Click Add New Entry
• Click Apply to apply changes.
• Click Reset to undo any changes made locally and revert to previously saved
values.
SNMPv3 groups
Configure SNMPv3 groups on the SMNPv3 Group Configuration page. The entry index
keys are Security Model and Security Name.
NS4702-24P-4X-V2 Managed Switch User Manual
Description
A string identifying the user name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is ASCII
characters from 33 to 126.
Indicates the security model that this entry should belong to.
Selections include:
NoAuth, NoPriv: None authentication and none privacy.
Auth, NoPriv: Authentication and none privacy.
Auth, Priv: Authentication and privacy.
The value of the security level cannot be modified if the entry already
exists. Ensure that the value is set correctly.
Indicates the authentication protocol that this entry should belong to.
Selections include:
None: None authentication protocol.
MD5: An optional flag to indicate that this user using MD5
authentication protocol.
SHA: An optional flag to indicate that this user using SHA
authentication protocol.
The value of security level cannot be modified if the entry already
exists. Ensure that the value is set correctly.
A string identifying the authentication pass phrase. For MD5
authentication protocol, the allowed string length is 8 to 32. For SHA
authentication protocol, the allowed string length is 8 to 40. The
allowed content is the ASCII characters from 33 to 126.
Indicates the privacy protocol that this entry should belong to.
Selections include:
None: None privacy protocol.
DES: An optional flag to indicate that this user using DES
authentication protocol.
AES: An optional flag to indicate that this user uses AES
authentication protocol.
A string identifying the privacy pass phrase. The allowed string length
is 8 to 32, and the allowed content is the ASCII characters from 33 to
126.
to add a new user entry.
Chapter 4: Web configuration
101