Cleaning The Thermocontrol Sensor And Down Chute - Windhager BIOWIN 2 TOUCH Operating Manual

Care, cleaning and full service

19.1 Cleaning the thermocontrol sensor and down chute

„ If necessary, remove fly ash from the thermocontrol sensor with a cleaning brush. The thermocontrol sensor is loca-
ted in the combustion chamber – Fig. 37.
„ If necessary, use a screwdriver to clean the inside of the down chute – Fig. 38.
„ Remove combustion residue from the combustion chamber with a vacuum cleaner – Fig. 39.
Fig. 37 Clean the thermocontrol sensor
Fig. 39 Remove combustion residue from the combustion chamber
Fig. 38 Clean the down chute
36