Windhager BIOWIN 2 TOUCH Operating Manual page 14

Important information for system operators
WARNING Cover plate for pellet chamber can crush and cut.
Use caution when opening the cover plate. Only authorized personnel are allowed to open cover plate.
WARNING Closing pellet chamber door can crush and cut.
Never insert hands between door and frame, or between door and closing bracket of the pellet chamber when
closing the door. Never insert hands into the hinge area when opening door.
WARNING Opening pellet chamber door can crush and cut.
Never insert hands between door and frame on the hinge side of the pellet chamber when opening door. Ne-
ver insert hands between door and closing bracket.
WARNING Removing the ash tray can crush and cut.
Never insert hands between frame of boiler/heater and ash tray when removing the ash tray.
WARNING Mounting the ash tray can crush and cut.
Never insert hands between frame of boiler/heater and ash tray when removing the ash tray.
WARNING Displacing the ash tray can crush and cut.
When moving the ash tray, never insert hands between floor of the heating boiler and ash tray.
WARNING Pinch point hazard.
Never insert hands between the cover plate and housing of heating chamber when opening or closing.
DANGER Smoke gas.
Ensure adequate ventilation in the boiler room. Smoke gas may cause poisoning.
WARNING Hot water and hot steam. Injury hazard.
Safety devices (such as the relief valve) will open automatically and release hot water or hot steam. Keep
away from safety devices. Do not operate safety devices manually when system water is hot or when device
is in operation.
DANGER Attention. Risk of fire.
Lack of water can lead to fire in pellet hopper.
Do not operate this device when water level in water container is below minimum!
Do not use fluids other than pure water.
Monitor the water level monthly and refill to minimum level when necessary.
Always keep water container closed with original lid.- Art. no. 007073 - grip plug.
See BioWIN 2 Touch operating manual for monitoring and refill procedures.
14