Fitting Reserve Supply Container Cover (Only Biowin Klassik); Fitting Cleaning Lever (Only Biowin Klassik And Premium) - Windhager BioWIN Assembly Instructions Manual

2. For the Installer
2.9 Fitting reserve supply container cover
– Insert protective grille in reserve supply container – Fig. 50.
– Fit both belts (bearings) with pre-fitted cover on reserve supply container (remove plug beforehand) – Fig. 51.
– Fit gas springs on reserve supply container – Fig. 52.
Fig. 50 Inserting protective grille
Fig. 52 Screwing on gas springs
2.10 Fitting cleaning lever
Punch through cut-out in right-hand side wall for cleaning lever and attach cleaning lever for heating surface
cleaning on side for BioWIN Premium/Klassik – Fig. 53.
Fig. 53 BioWIN Premium/Klassik - view from right
Fig. 51 Fitting belts (bearings)
(only BioWIN Klassik and Premium)
18
(only BioWIN Klassik)