Table of Contents
Advertisement
Manual
00809-0500-4881
7. If used, disconnect and remove the external relay leads from the alarm output relay
8. Disconnect the signal cable leads from the O
Rosemount OCX8800C
terminal block.
and from the COe and CJC connector (J5),
Figure 10-6: Remote Electronics Housing Cable Connections
A. Heater power connector (J3)
B. To ground screw
C. COe sensor and CJC connector (J4)
D. Electronics housing
E. O
cell and thermocouple connector (J5)
2
F. Signal cable
G. Heater power cable
Note
Wire colors shown are for cables supplied by Emerson.
Table 10-2: J3 Connections
Wire color
Yellow
Maintenance and service
cell and thermocouple connector (J4)
2
Figure
10-6.
Connects to
2 heater CO
April 2023
211
Advertisement
Table of Contents
