Manual
00809-0500-4881
The block supports signal status propagation. There is no process alarm detection in the
input selector function block.
Figure 8-28: Input Selector (ISEL) Function Block
A. Out
B. Selector
•
IN (1-4) = Input used in the selected algorithm.
•
DISABLE (1-4) = Discrete input used to enable the associated input channel.
•
OP_SELECT = Input used to override algorithm.
•
TRK_VAL = The value after scaling applied to OUT in local channel override.
•
SELECTED = The selected channel number.
•
OUT = The block output and status.
Figure 8-28
block parameters and their descriptions, units of measure, and index numbers.
Rosemount OCX8800C
illustrates the internal components of the ISEL block.
F
Fieldbus
™
OUNDATION
April 2023
Table 8-30
lists the ISEL
173