Table of Contents
Advertisement
Protective conducter terminal
Risk of electrical shock
Warning: Refer to Reference Manual.
Preface
The purpose of this manual is to provide information concerning the components, functions, installation, and
maintenance of the Rosemount OCX8800.
Emerson recommends that you thoroughly familiarize yourself with
installing your transmitter.
Description and specifications
characteristics and components. The remaining sections contain detailed procedures and information necessary to
install and service the transmitter.
Before contacting Emerson concerning any questions, first consult this manual. It describes most situations
encountered in your equipment's operation and details necessary action.
Definitions
The following definitions apply to warnings, cautions, and notes found throughout this publication.
WARNING
Highlights an operation or maintenance procedure, condition, statement, etc. that if not strictly observed, could result
in injury, death, or long-term health hazards of personnel.
CAUTION
Highlights an operation or maintenance procedure, practice, condition, statement, etc. that if not strictly observed,
could result in damage to or destruction of equipment or loss of effectiveness.
Note
Highlights an essential operating procedure, condition, or statement.
Notice
The contents of this publication are presented for informational purposes only, and while every effort has been made
to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding
the products or services described herein or their use or applicability. All sales are governed by Rosemount's
terms and conditions, which are available upon request. We reserve the right to modify or improve the designs
or specifications of such products at any time.
Rosemount does not assume responsibility for the selection, use, or maintenance of any product. Responsibility for
proper selection, use, and maintenance of any Rosemount product remains solely with the purchaser and end-user.
To the best of Rosemount's knowledge, the information herein is complete and accurate. Rosemount makes no
warranties, expressed or implied, including implied warranties of merchantability and fitness for a particular purpose,
with respect to this manual and, in no event, shall Rosemount be liable for any incidental, punitive, special, or
consequential damages including, but not limited to, loss of production, loss of profits, loss of revenue or use, and
costs incurred, including without limitation for capital, fuel and power, and claims of third parties.
Product names used herein are for manufacturer or supplier identification only and may be trademarks/registered
trademarks of these companies.
Rosemount and the Rosemount logo are registered trademarks of Rosemount. The Emerson logo is a trademark and
service mark of Emerson Electric Co.
presents the basic principles of the transmitter along with its performance
Description and specifications
and
Install
before
3
Advertisement
Table of Contents
