Table of Contents
Advertisement
Manual
00809-0500-4881
4
Using the local operator interface
(LOI)
4.1
Display orientation
The local operator interface (LOI) module mounts to a connector on the LOI board.
The board is installed on the end of the electronics stack in the electronics housing,
4-1. There are four mating connectors on the back of the LOI module that allow the LOI to
be oriented as desired.
Figure 4-1: LOI components mounting
A. Electronics housing (cover removed)
B. Electronics stack
C. LOI connector
D. LOI board
E. LOI module
Rosemount OCX8800C
Using the local operator interface (LOI)
April 2023
Figure
57
Advertisement
Table of Contents
