Starting And Canceling Printing; Starting - Epson SC-F2200 Series User Manual

SC-F2200 Series User's Guide
Starting and Canceling
Printing

Starting

A
When a job has been completely received, the
preview display opens on the screen and the
lamp on the button turns on.
B
Check that the T-shirt is loaded, and then press
the button.
Note:
When you execute Print Head Nozzle Check or Head
Cleaning before you start printing or in between
repeated printings, press in the order of
Maintenance, and then select the menu.
When executing Print Head Nozzle Check, be sure to
load the media in the center of the platen.
"Loading media" on page 92
Basic Printing
When reprinting (repeat printing)
the same job
Precautions for repeat printing
Reprint data is not overwritten until a new job is
sent to the printer.
Reprint data is not deleted until the following
occurs.
❏ The USB memory stick is removed
❏ The power is turned off
Reprint data is not saved in the following cases.
❏ The USB memory stick is corrupt
❏ There is not enough free space on the USB
memory stick or the maximum number of
readable files (999) has been exceeded
❏ The USB memory stick was removed from the
printer while data was being written/read
❏ Printing was started by pressing the
the printer, but was canceled before printing was
complete
If saving reprint data fails, an error message is
displayed when you select the Reprint menu.
"What to Do When a Message Is Displayed" on
page 113
Repeat printing
A
Press in the order of
(menu) -
B
Input the number of prints, and then press
Done.
You can also change the settings for the Head
Move Direction here.
❏ Auto: Printing is done according to the
70
(menu) - Reprint.
settings of the print job.
button on