Starting Procedure; Closing Procedure; Uninstalling Software; Windows 11 - Epson SC-F2200 Series User Manual

SC-F2200 Series User's Guide

Starting Procedure

Start the software from a web browser on a computer
or smart device that is connected to the same network
as the printer.
A
Press , and then press in the order
of General Settings - Network Settings -
Advanced - TCP/IP to check the IP address
of the printer.
Note:
The IP address can also be checked by printing a
network connection check report. A report can be
printed by touching the following in order from
the Home screen.
- General Settings - Network Settings -
Connection Check - Network Status - Print
Status Sheet
B
Start a Web browser on a computer or smart
device connected to the printer via the network.
C
Enter the IP address of the printer in the
address bar of the Web browser and press the
Enter or Return key.
Format:
IPv4: http://IP address of printer/
IPv6: http://[IP address of printer]/
Example:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
To log on as an administrator, proceed to the
next step.
D
Click Log in at the top-right of the screen, enter
your User Name and Current password, and
then click OK.

Closing Procedure

Close the Web browser.
Introduction

Uninstalling Software

Important:
❏ Log into a "Computer administrator" account
(an account with administrative privileges).
❏ Enter the administrator password when
prompted and then proceed with the
remainder of the operation.
❏ Exit any other applications that may be
running.
❏ If you are reinstalling the Epson
communications drivers after removing them,
restart the computer.
Windows
This section explains how to uninstall the Epson
communications drivers using them as an example.
We recommend that you turn off the printer and
disconnect the cables connected to the computer
before you start work.

Windows 11

A
Click the Start button - Settings.
The Settings screen is displayed.
B
Click Apps from the menu on the left side of
the screen.
C
Click Apps & features (or Installed apps).
D
Click the SC-F2200 Series Comm Driver
menu button from the list, and then select
Uninstall from the menu.
Follow the on-screen instructions to continue.
When the confirmation message appears, click
Yes.
Except for Windows 11
A
Display the Control Panel, and then click
Uninstall a program.
34