SC-F2200 Series
User's Guide
Table of Supported Label Scales and Media Thickness
When printing with Platen Gap set to Manual, check the combination of spacers that support the thickness of the
media you are using and the position of the scale on the platen gap lever in the table for the platen type you are
using.
Important:
The position of the scale in the table is a guide for the platen height. Before printing for the first time, make
sure you check the platen height.
"Checking the platen height (when set to Manual)" on page 125
When L, M, or S Size Grip Pad Platen is Installed
Label Scale
P
-
1
< 1.0 mm (0.04 in.)
-
2
-
3
2.0 mm (0.08 in.)
-
4
3.0 mm (0.12 in.)
-
5
4.0 mm (0.16 in.)
-
6
5.0 mm (0.2 in.)
-
7
6.0 mm (0.24 in.)
-
8
7.0 mm (0.28 in.)
Appendix
Spacer Usage and Media Thickness
A+B
A only
Supports media 6.0
mm (0.24 in.) thicker
than A+B
5.0 mm (0.2 in.)
6.0 mm (0.24 in.)
7.0 mm (0.28 in.)
8.0 mm (0.31 in.)
9.0 mm (0.35 in.)
10.0 mm (0.39 in.)
11.0 mm (0.43 in.)
12.0 mm (0.47 in.)
13.0 mm (0.51 in.)
B only
Supports media 10.0
mm (0.39 in.) thicker
than A+B
9.0 mm (0.35 in.)
10.0 mm (0.39 in.)
11.0 mm (0.43 in.)
12.0 mm (0.47 in.)
13.0 mm (0.51 in.)
14.0 mm (0.55 in.)
15.0 mm (0.59 in.)
16.0 mm (0.63 in.)
17.0 mm (0.67 in.)
141
None
Supports media 16.0
mm (0.63 in.) thicker
than A+B
15.0 mm (0.59 in.)
16.0 mm (0.63 in.)
17.0 mm (0.67 in.)
18.0 mm (0.71 in.)
19.0 mm (0.75 in.)
20.0 mm (0.79 in.)
21.0 mm (0.83 in.)
22.0 mm (0.87 in.)
24.0 mm (0.94in.)