Turning Off The Power Using Power Off Timer; Canceling Printing - Epson SureColor SC-F6300 Series User Manual

SC-F6300 Series User's Guide
Turning Off the Power
Using Power Off Timer
The printer offers the following two power management
options.
❏ Sleep mode
The printer enters sleep mode when there are no
errors, no print jobs being received, and no control
panel or other operations performed. When the
printer enters sleep mode, the control panel's screen
turns off and the internal motors and other parts
switch off to consume less power.
When you press the P button, the printer returns
from sleep mode. The delay before the printer
enters sleep mode can be selected from values
between 5 and 240 minutes. At default settings, the
printer enters sleep mode if no operations are
performed for 15 minutes. The delay can be
changed from the Setup menu. U
on page 54
Note:
When the printer enters sleep mode, the control
panel's screen goes blank as if the power has been
turned off, but the P light remains lit.
❏ Power Off Timer
The printer is equipped with a Power Off Timer
function that automatically turns the printer off if
no errors occur, no print jobs are received, and no
control panel or other operations are performed for
a set period of time. The delay before the printer
turns off automatically can be selected from values
between 1 and 24 hours in increments of 1 hour.
By default, the printer turns off automatically if no
errors occur, no print jobs are received, and no
control panel or other operations are performed for
eight hours or longer. Power Off Timer settings can
be adjusted in the Setup menu. U
on page 54
About Power Management
You can adjust the time before Power Management is
applied. Any increase will affect the printer's energy
efficiency. Please consider the environment before
making any change.
Basic Operations

Canceling Printing

Press the printer's W button, select Job Cancel on the
screen, and then press the Z button.
The print job is canceled even in the middle of printing.
It may take a while before the printer returns to ready
status after canceling a job.
"Setup menu"
"Setup menu"
45