Epson SC-F2200 Series User Manual page 132

SC-F2200 Series User's Guide
Product
*
Pre-treatment roller set
Replacement rollers for
*
pre-treatment (3 pieces)
*
Hard roller
Grip Pad Tool
*
Funnel
*
Funnel filter
* Not available in all regions.
For SC-F2280
Product
Pre-treatment Liquid
Polyester Pre-treatment Liquid
Hanger Platen - L
Hanger Platen - M
Hanger Platen - S
Large Platen (16" × 20" / 406 ×
508 mm)
Medium Platen (14" × 16" / 356 ×
406 mm)
Small Platen (10" × 12" / 254 ×
305 mm)
Extra Small Platen
Sleeve Platen
Medium Grooved Platen
Platen Grip Pad - L
Platen Grip Pad - M
Platen Grip Pad - S
Appendix
Part number
C12C891201
C12C891211
C12C891221
C12C934151
C12C936561
C13S210126
Part number
T43R1
T7361
T43R2
C12C938921
C12C938941
C12C938961
C12C933981
C12C933991
C12C934001
C12C938981
C12C939021
C12C939001
C13S210121
C13S210122
C13S210123
132
Explanation
Set of roller sections x3, handle, and tray.
The same as the roller section supplied with the
Pre-treatment roller set.
Set of roller sections (hard) and handle.
The same as the grip pad tool supplied with the printer.
A funnel used to filter cotton pre-treatment liquid.
A filter used to filter cotton pre-treatment liquid.
Explanation
20 liters. Dilute before use.
"Pre-treatment" on page 40
18 liters. Use undiluted or diluted depending on the ink
used for printing.
"Pre-treatment" on page 40
A platen with a hanger. The following shows the
printable area for each size.
L size: 16" × 20" / 406 × 508 mm
M size: 14" × 16" / 356 × 406 mm
S size: 10" × 12" / 254 × 305 mm
A standard platen without a hanger. The following
shows the printable area for each size.
L size: 16" × 20" / 406 × 508 mm
M size: 14" × 16" / 356 × 406 mm
S size: 10" × 12" / 254 × 305 mm
XS size: 7" × 8" / 178 × 203 mm
This platen allows you to print correctly on T-shirt cuffs.
Printable area: 4" x 4"/102 x 102 mm
This platen allows you to print correctly on polo shirts as
well as shirts with zippers and buttons.
Printable area: Equivalent to the area for M size hanger
platen
A grip pad for using the L/M/S size hanger platen as a
grip pad covered platen.
You cannot use the grip pads for standard platens with
hanger platens.