Loading On Medium Grooved Platens - Epson SC-F2200 Series User Manual

SC-F2200 Series User's Guide
Important:
❏ Load the T-shirt so that the side seams
and sleeve seams are not on the top. If
there are raised sections, such as seams,
an error may occur, or the print quality
may decline.
❏ Do not pull too hard on the T-shirt.
If the T-shirt is stretched too much,
the print quality may decline due to
deformed images and so on, and the
white under-base print may extend
outside the image.
F
Attach the platen frame again.
Load it so that the small holes in the frame are
at the front and back.
G
Pull the T-shirt outside of the frame to remove
any creases and slack.
Basic Printing
Important:
Pull the T-shirt so that there is no slack or
creasing. However, if the T-shirts is stretched
too much, the print quality may decline due
to deformation of the image, and the white
under-base print may extend outside the
image.
H
Press down the frame of the platen so that it
does not become loose.
I
Tuck in the parts that extend beyond the frame
so that they do not drape over the movable
base.
Loading on Medium Grooved
Platens
A
Press the
B
Check that the platen is installed.
See the following if the platen is not installed.
"Replacing platens" on page 55
C
Remove the frame from the platen.
67
button to turn on the printer.