Epson SC-F2200 Series User Manual page 53

SC-F2200 Series User's Guide
E
Stick it from the end that is already stuck, as
shown in the illustration.
Removing the Sheet
Important:
❏ Do not apply hot air such as a drier to soften
the glue. Failure to observe this precaution
could result in deformed parts.
❏ Do not use organic solvents such as alcohol.
Failure to observe this precaution could result
in discoloration, warping, or damage to parts.
Note:
Pads that have been stuck to the platen for a long time
may be hard to peel off. In this case, use a commercially
available spatula for peeling off labels.
The procedure varies depending on the platen you are
using.
Start from step 1 for a standard platen, and from step
3 for a hanger platen.
Basic Printing
A
Place the platen face down on a flat surface.
B
Unfold the cloth sheet from around the back
edges of the platen.
C
Place the platen on a flat surface with the
surface visible, and then press on the front side.
53