Mitel MIVOICE OFFICE 400 User Manual page 52

Phoning
Function
Do not disturb (forward-
ing) on/off
Call forw. if busy (CFB) to
user on/off
Call forw. if busy (CFB) to
VM on/off
Call forw. (CFU) to user
on/off
Call forw. (CFU) to pager
on/off
Call forw. (CFU) to text
message on/off
Call forw. (CFU) to VM
on/off
Call forwarding menu
Presence menu
Presence profile on/off
Intrusion
Welcome announcement
on/off
Discreet ring on/off
Announcement to user
52
Description
Your phone does not ring and is set to busy for
incoming calls. Incoming calls are automatically for-
warded to a destination that has been configured by
your system administrator.
If you are busy, incoming calls will be forwarded to
specific destination (user).
If you are busy, incoming calls will be forwarded to
specific destination (voice mail).
Incoming calls are automatically forwarded to a spe-
cific destination.
Incoming calls are automatically forwarded to a spe-
cific destination.
Incoming calls are automatically forwarded to a spe-
cific destination.
Incoming calls are automatically forwarded to a spe-
cific destination.
Direct access to the
forwarding", page 58).
Direct access to the
trolling the presence status", page 56).
Activate/deactivate presence profile. You can select
a presence profile (profile number 1-4, see chapter
"Controlling the presence status", page 56).
This function allows you to intrude to a busy user's
call with notification (see chapter "Activating intru-
sion/answering", page 44).
Announcement service for incoming internal and
external calls. If you do not answer an external call
after a set delay, the user who is calling will obtain an
announcement. After the announcement the caller
will then hear the ring-back tone again.
When this function is on, the phone only rings once.
For further information, please see "Activating dis-
creet ring", page 42.
Speak directly to an internal user via the loudspeaker
- where available - without them having to first pick up
the call. An announcement is a one-sided connection
and is indicated by two short signal tones on the
recipient phone.
Forwarding (see chapter "Call
Presence (see chapter "Con-
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.0 – R4.0 – 06.2015