Mitel MIVOICE OFFICE 400 User Manual page 47

Press the function key for the desired call routing profile.
➔
Call routing is activated/deactivated. The LED on the function key is switched
on/off (Mitel 6865 SIP only).
Activating ring alone
You want to specify the phone on which an incoming call is signalled
acoustically.
If your system administrator has set up one phone number with several
phones (see "One number user concept", page 7),you can use Ring Alone
to define on which phone a call is to be signalled acoustically. As soon as
you activate Ring Alone on one phone, the ring tone is deactivated for all
other phones. An incoming call is signalled in the display of all phones.
You can answer the call on each of your phones.
This function must be saved to a configurable function key with Self Ser-
vice Portal (see chapter "Configuring or deleting a key assignment",
page 81).
Note:
When you have activated ring alone but deactivated the personal call rout-
ing for a phone in parallel, an incoming call is not acoustically but only vis-
ually signalled.
Activating/deactivating ring alone
Press the function key for
➔
The function is activated/deactivated. The LED on the function key is
switched on/off (Mitel 6865 SIP only).
Locking/Unlocking your phone
You need to leave your desk and want to ensure that no-one can alter your
phone's settings, look at your private data, or make calls from your phone.
You can lock your phone with a 2 to10-digit PIN (for more information on
the PIN, see "Changing the PIN", page 73).
This function must be saved to a configurable function key with Self Ser-
vice Portal (see chapter "Configuring or deleting a key assignment",
page 81).
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.0 – R4.0 – 06.2015
Ring Alone on/off.
Phoning
47