Using Further Functions - Mitel MIVOICE OFFICE 400 User Manual

You cannot reject silent intrusion (but you can block it; see "Protecting
yourself against calls", page 75). The microphone of the third user remains
off. The third user can, however, enter the conversation at any point by
enabling his or her microphone or pressing the intrusion function key.
This function must be saved to a configurable function key with Self Ser-
vice Portal (see chapter "Configuring or deleting a key assignment",
page 81).
Notes:
• Silent intrusion must be enabled in the communication system.
• Your system administrator must grant you silent intrusion rights.
• Silent intrusion may infringe on your national data protection provisions
or be permitted only under certain circumstances. If you intend to use
this function, you should therefore notify your call party in advance.
Activating silent intrusion (the users are talking):
1. Press the function key for
2. Enter the call number of the user you want as per the key configuration.
➔
The function is activated.
➔
If the user has blocked intrusion, connection set up will be cancelled.
Answering silent intrusion:
There are neither display nor sound signals on your phone to indicate silent
intrusion.

Using further functions

This section explains some more convenient features provided by
your phone. All the functions you can save under a configurable key
can be found in chapter "Overview of available functions", page 51.
Activating personal call routing
You want to specify which of your phone shall ring when you receive a call.
You can specify the phone on which a call is signalled with personal call
routing.
Your system administrator has set you up multiple phones with the same
phone number in the one number user concept (see "One number user
concept", page 7). The system administrator has also assigned you per-
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/1.0 – R4.0 – 06.2015
Silent intrusion.
Phoning
45