Switching The Dlt-V73 On/Off - Advantech DLT-V73 Series User Manual

8.2.

Switching the DLT-V73 on/off

The following factors determine how the DLT-V73 can be switched on and off:
Is the DLT-V73 mounted on a vehicle and connected with the ignition signal?

Automatic shutdown settings defined in respective configuration application, e.g.

"MDevice".
NOTICE
Switch on – depending on the configuration:
1. Press the POWER button.
2. Or: Apply the supply voltage.
3. Or: Through the ignition signal of the vehicle (depends on the automatic
Switch off – depending on the configuration:
1. Press the POWER button of the activated DLT-V73.
2. Or: Disconnect the supply voltage.
3. Or: Deactivate the ignition of the connected vehicle (depends on the
DLT-V73 Series User Manual V1.00
Time between switching off and on: 10 seconds
After the DLT-V73 has been shut down and switched off, it takes 10
seconds until the device will react to a swith-on signal (POWER button
/ ignition).
The Manual "MDevice" is available at our websites
shutdown settings).
NOTICE: Devices without integrated UPS will be hard-terminated (data
loss possible).
Devices with integrated UPS will switch automatically to UPS/battery
power supply when the supply voltage is broken.
automatic shutdown settings).
Operating the DLT-V73
66 / 172