Advantech DLT-V73 Mounting Instructions

Mounting instructions: Attaching the keyboard holder to the DLT-V73
1
For your safety
These mounting instructions apply to all DLT-V73 models. They describe how to attach
the appropriate keyboard mounting kit.
 Read and observe the mounting instructions carefully.
 Keep them for future reference.
WARNING
Risk of injury due to weight and sharp-edged parts.
The DLT-V73 can fall down and cause injuries due to its weight. The strain relief
rail can have sharp edges and cause cutting injuries.
Always hold the device by the housing with both hands.

 Never use the antenna cap as a handle. It can break due to the weight
involved.
Do not hold the device by the strain relief rail.

Use the assistance of a second person for installation work.

Advantech Co.; Ltd. Mounting instructions: Attaching the keyboard holder to the DLT-V73, V1.00, PN 20080V7320
WARNING
Risk of injury and damage due to improper installation
These mounting instructions are intended for skilled personnel. Only qualified
skilled personnel may mount/install DLT-V73 devices
2
Tools required
Allen key (5 mm width for M6)
−
3
Installation sequence
If the DLT-V73 is being used with a keyboard mounting kit:
 First attach the keyboard holder.
 Then mount the complete system at the deployment location, e.g., to the forklift
(RAM-Mount).
Note
The keyboard mounting is not compatible with a DLT-V73 Scanner mounting.
Page 1 / 4